An ISO 9001:2015 Certified Company

Mixers & Stirrers

We Are The Manufacturer of Supplier Of Mixers & Stirrers Which Have the Following Types:

Teleflo Turbine Marine Propeller Saw Tooth Stator-Rotor Type Industrial And Laboratory Stirrers Mixers Emulsifiers And Homogenizers, Teleflo Barrel Mixers, Teleflo Static- Mixers, Etc In FRP PP, PVC, PTFE, SS 304, SS- 316, For Air Gas And Liquids, Etc.

We offer high quality, mixers and stirrers.

Laboratory Stirrers & Emulsifiers

Teleflo Laboratory Stirrers have maintenance free Electric or Air motors driven mixing elements ideally suited for continuous duty stirring and mixing applications. Teleflo Stirrers have sturdy adjustable stand, low noise, smooth start and stop with heavy duty AC/ DC Universal or Induction Motors ranging from 1/12 HP to 1.5HP. and speed 100 RPM to 15000 RPM. Retort Stand height ranges from 350 mm to 1500 mm. Capacity (depending on viscosity) ranges from 1 liter to 200 liters.

Electronic or Autovariac speed control regulators are also provided on request. Coupling is of bush type or self centering chuck type. Material of construction is of Stainless Steel SS 304 or SS 316. Teflon or PP lined mixing elements also available for specific applications. Special GMP stirrers available for Pharmaceutical Industry.


Industrial Mixers

Teleflo Industrial Mixers are available in Stainless Steel SS304, SS316, Teflon or PP lined material of construction, are of three types :

  • DIRECT DRIVE MIXERS : These industrial mixers, stainless steel industrial mixers are compact and have application for low viscosity fluids. They are available in standard speeds of 960, 1400. 2800 RPM and 0.25 HP to 2 HP Induction motor. These mixers are flange mounted on top of tank or clamped to side of tank.
  • GEARED DRIVE MIXERS : These industrial mixers are slow speed helical geared mixers and are designed to provide long life and trouble free service in wide variety of viscous and semi- viscous applications. Selection of mixer depends on application, volume, viscosity and specific gravity. Speeds range from 100 RPM to 500 RPM and power range from 0.5 HP to 10 HP. These mixers are flange mounted or bracket/ clamp mounted for top entry or angular entry.
  • HIGH SPEED DISPERSER HOMOGENISER : These stainless steel industrial mixers are used for dispersing and homogenizing two or more liquids .They also break up and dissolve powders in liquid. They use either a saw tooth cutter for normal duty and stator- rotor combination for high shear rate applications. The power range is available from 1 HP to 7.5 HP and speeds 1400 RPM and 2800 RPM. Industrial Mixers are available in Stainless Steel SS304, SS316, and Teflon or PP lined material of construction for specific applications.


Drum Mixers

Our drum mixers are light and portable with electric or air motor and ideal for easy and rapid stirring up suspensions and mixing additives in drums. For convenience and safety the unit incorporates a threaded 2" BSP or NPT bung adaptor nipple to allow mounting on standard 55 gallon ( 205 liter) drum. Models are available with either folding propeller or fixed blades.


Static Mixers

Teleflo Static mixers are a series of geometric mixing elements fixed within a pipe, which use the energy of the flow stream to create mixing between two or more fluids. Teleflo has optimized the design of out static mixers to achieve the greatest amount of mixing with the lowest pressure loss possible, whether your application involves low viscosity fluids, high viscosity fluids, fibrous materials, or just the need for a quick flash blend, we have a static mixer design available to optimize your blending process.


Economical prices Wide range of material installation Easy
No maintenance Low operating cost Rugged design

Teleflo Static mixers are a row of carefully designed fixed mixing elements within a pipe ensure mixing between two or more fluids. Teleflo design of static mixer creates very little pressure drop and the greatest amount of mixing. Teleflo mixers are used in blending processes as well as mixing. Static mixers are also called “motionless mixers” This is because the mixing is done by permanently affixed mixing fins, obstructions, or channels mounted in pipes, designed for promoting mixing as fluid flows through the mixes.

The criteria for using motionless mixers is to achieve homogeneity of composition in a liquid without the need for external process mixing, which can be very costly and ofter questionable. When sizing/designing a static mixer the main factors to consider is the flow rate and the properties of the fluid, and it is possible to calculate the number of mixing elements required to produce a homogeneous mixture. Teleflo STATIC MIXERS COME IN Type – A (Standard) and Type – B ( with injection port ) as per customer's choice.


FRP Static Mixer

We are one of the leading manufacturers of PP/ PVC/ PTFE/ teflon & FRP Static Mixer. Our clients can avail from us a qualitative range of  Static Mixers. These have geometric mixing elements fixed within a pipe, which uses the energy of the flow stream to create mixing between two or more fluids. This range possesses optimized design of static mixers that facilitates in achieving excellent mixing with the lowest pressure loss possible. These are ideal for low viscosity fluids, high viscosity fluids, fibrous materials, or just the need for a quick flash blend.<


Magnetic Stirrer

Teleflo Magnetic Stirrer is compact stainless steel top, Solid state motorized magnetic stirrer. This variable speed Magnetic Stirrer has step less solid state speed regulator having facility of soft start & & restart. These stirrers also available with ‘hot plate design magnetic stirrer.

These Magnetic Stirrers are intended for stirring solutions of low viscosity in open or closed containers/pans. Stirring is accomplished by a magnetized Teflon coated paddle to be placed in the container. Each apparatus of this group can be operated on a bench, a stand or a laboratory scaffold. The intensity of Magnetic Stirrer depending on requirements can be adjusted with the thyristorised voltage controller incorporated which also ensures step less adjustments from a very low to the maximum agitation.


Magnetic Stirrer has Soft start facility increases the speed of rotation gradually, which does not allow Teflon magnetic bit to slip. Restart switch is provided to bring the Teflon stirring bit at the center. Speed is variable up to 800/1000/1800RPM.